Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
The manuel was exactly what I needed and I received it promptly. Thanks
Text excerpt from page 6 (click to view)
AS Series Owner�s Manual
9/11/98 12:51 PM
Page 6
New Construction
�1-1/2" �1-1/2" �1-1/2"
Step One: Remove the grille from the speaker frame.
Step Two: Determine the correct speaker location.
Step Three: Attach the proper mounting brackets, marked and preset at 3/8" 1/2" 5/8" and 3/4" corre, , , , sponding to the thickness of the dry wall, to the speaker frame.
Step Four: Nail or screw the speaker-frame assembly to the wall studs and route the wires through the frame opening.
After the Drywall is Installed
Step Five: Cut the drywall.
Step Six: Connect the speaker wires to the baffle assembly and install baffle assembly in frame. Do not overtighten the baffle screws.